Roll over image to zoom in
Promira 34 pin - 10 pin cable with headers
34-Pin: 10-Pin Header Cable
$35
Part Number: TP510110
Availability: In-Stock
This is a replacement cable for the Promira™ Serial Platform. The 34-pin end has a locking friction ramp to ensure good connectivity with the Promira Serial Platform, while the end is a 10-pin, 5x2 0.010" standard header. This cable is backwards compatible with the I2C/SPI Activity Board, the CAN/I2C Activity Board Pro, and the High-Speed SPI Flash Demo Board. It can be used with the 10-Pin Split Cable and the 10-Pin Grabber Clip Split Cable.
- Receive a 15% discount on this product when purchased with any host adapter, interface, protocol analyzer, or development kit
- Offer limited to 3 accessory cables for each host adapter, interface, protocol analyzer, or development kit purchased
Key Features
check
Includes a 34-pin connector on one end to attach to your Promira Serial Platform and a 10-pin box header to attach to your project check
The project side connector is a standard 5x2 0.100" (2.54mm) pitch IDC type keyed box connector check
The 34-pin box header is a standard 2x17, 0.079" (2.00 mm) pitch IDC type keyed box connector check
Cable is 5 inches (12.7cm) long to minimize signal degradation check
For more advanced or power intensive applications, the 34-pin cables are recommended because they provide additional connectivity to your project, enabling features not available with the 10-pin cables. Please note, specific pins and functionality are determined by the applications licensed on your Promira Serial Platform. Tech Specs
Product Specs
keyboard_arrow_down
