The 34-Pin Split Cable attaches to the ribbon cable end directly on the Promira™ Serial Platform and allows you to connect any of the 34 Promira platform pins to your target. The 34-Pin Split Cable is an ideal solution if you don’t have space for a 2x17, 0.079 inch (2.00 mm) pitch header on your test board or want to make use of a header that doesn't have the same pin-out as the Promira Serial Platform ribbon cable.

Unless you have standardized on the 34-pin header, this is a must-have accessory if you need supplemental power for your embedded project (Promira platform pins 22 and 24 offer an additional 100 mA of power for your board, above the 100mA already available via pins 4 and 6), or intend to use any of the advanced functionality optionally available with your Promira Serial Platform, such as eSPI, dual or quad I/O SPI.

If the leads are impractical for your application, grabber clip ends or the 34-pin grabber cable are available.

• Receive a 15% discount on this product when purchased with any host adapter, interface, protocol analyzer, or development kit
  
• Offer limited to 3 accessory cables for each host adapter, interface, protocol analyzer, or development kit purchased