Being new to Total Phase, whenever the opportunity to travel comes my way, I do my very best to take it! This time, that opportunity took me all the way across the United States to Boston for the Embedded Systems Conference. I had never been to Boston or the ESC show, so to say the least, I was pretty excited.

The Beagle I2C/SPI Protocol Analyzer Leads the Pack

The show lasted just two days, so as you might assume, it flew by! There seemed to be a healthy amount of people coming by to check out our tools. The tool that got the most interest seemed to be our Beagle I2C/SPI Protocol Analyzer. People love (love may be an understatement) the ability to monitor the I2C and SPI bus in true, real time. New and existing customers alike visited our booth to tell us how amazing our analyzers are. They appreciate how much time and energy our tools save them in the debug phases of development. Below are some of the reasons why our Beagle I2C/SPI analyzer gets so much attention:

• Non-intrusively monitor I2C up to 4 MHz
• Non-intrusively monitor SPI up to 24 MHz
• Non-intrusively monitor MDIO up to 2.5 MHz
• Real-Time Data Capture and Display - Watch I2C, and SPI packets as they occur on the bus.
• Bit-level timing down to 20 ns resolution
• Fully Windows, Linux, and Mac OS X compatible
• Includes full function monitoring tools
• Low Cost (just $330)

See How the I2C Adapter and Analyzer Work for You

If you would like to see the demo that got people so excited about our Beagle I2C/SPI Protocol Analyzer, check out the demo video, Using an I2C Host Adapter and I2C Protocol Analyzer to Prototype Embedded Systems.

We believe in keeping it simple and straight forward. We know that no one wants to spend long nights figuring out how to use a tool so, we offer a truly “plug and play” solution. Don’t believe it, check out this video where we show how you can literally set up and start a capture in under 90 seconds!

It is always fun to be able to meet new and existing customers. Being the East Coast Technical Sales Representative, I don’t often get to meet our customers face-to-face, but trade shows change that. I love getting the opportunity to meet and educate people on the many benefits of our tools. Our tools are simple and, again, truly easy-to-use. People really appreciate that Total Phase is offering real solutions for real problems without breaking the bank or requiring hours of time of learning. Just plug in and start debugging!

More Tools - More Capabilities

Total Phase offers a range of different development tools, from protocol analyzers and host adapters, and now offering a cable testing solution. We support I2C/SPI/USB/CAN/eSPI/A2B and cable testing. If you work with any of these protocols, and are not already familiar with our tools, I would strongly suggest you reach out and give us a call. We more than likely have a solution that you have been looking for for far too long.

To everyone that I got to meet in Boston, I wish you all well and look forward to working with you soon. To everyone else, please don’t hesitate to reach out and contact us. We are more than excited to help each and every one of you in whatever way we possibly can. Give us a call at (408) 850-6501 or email us at sales@totalphase.com.