I2C SPI USB CAN eSPI Cable Testing View All Quick Start Guides User Manuals Software Downloads Knowledge Base Videos Case Studies App Notes White Papers Sales Support About Us
Products Blog Sales Support Contact Search

SPI Development Kit

$880

Part Number: TP120212

Availability: In-Stock

The SPI Development Kit is a comprehensive and cost-effective kit that bundles together a complete set of Total Phase's industry-leading SPI development tools and popular accessories. Both beginners and advanced developers will appreciate the convenience and value of the kit for developing and debugging an SPI bus on an embedded system.

With this kit, developers can exercise target SPI devices, simulate an SPI master, program and verify SPI-based Flash devices, and passively monitor an SPI bus in real-time with bit-level timing down to 20 ns.

Key Features

Cheetah SPI Host Adapter
SPI master at up to 40+ MHz Transaction queuing for maximum throughput Pipelined architecture for gapless shifting Precise timing and user-insertable delays Supports up to 3 slave selects Flash/EEPROM programming; in-system or stand-alone
Beagle I2C/SPI Protocol Analyzer
Non-intrusively monitor SPI up to 24 MHz† Bit-level timing down to 20 ns resolution Real-time data capture and display - Watch SPI packets as they occur on the bus View SPI protocol-level decoded data packets and SPI-specific error code values View all the bytes from the transaction in Data pane Nearly limitless capture - Captured data is streamed via High-speed USB directly to your computer
† Actual SPI capture performance is dependent on CPU speed and SPI bus throughput. 24 MHz SPI capture has been tested for typical applications (e.g., captures of a few hundred SPI packets). Depending on user configuration, the maximum achievable capture throughput for continuous streaming applications may be less than 24 MHz.
High-Speed SPI Flash Demo Board
Provides known working SPI Flash memory for testing and debugging purposes. Target SPI Flash Memory: M25P32 32 Mbit, Low Voltage, Serial Flash Memory With 50MHz SPI Bus Interface (Numonyx) Easy connection via a 10-pin socket

Tech Specs

Beagle I2C/SPI Protocol Analyzer

Target Bus/Data Monitoring

  • I2C: Up to 4 MHz
  • SPI: Up to 24 MHz
  • MDIO: Up to 2.5 MHz

Host Bus Interface

  • USB 2.0
  • Type-B receptacle

Target Bus Cable

  • 10-pin ribbon cable
  • 1.27mm (0.05") pitch
  • 130.175 mm (5 1/8") length

Target Bus Connector

  • Type: 2x5 IDC female, 2.54 mm (0.10") pitch
  • Pinout
    • Power Pins: GND (Pins 2, 10), NC/+5V (Pins 4,6)
    • I2C Pins: SCL (Pin 1), SDA (Pin 3)
    • SPI Pins: MISO (Pin 5), SCLK (Pin 7), MOSI (Pin 8), SS (Pin 9)
    • GPIO Pins: 1, 3, 5, 7, 8, 9

DC Characteristics

  • Target Power: +5V, 25 mA max
  • I2C/SPI/MDIO Signal: 3.3V, 10mA

Operating Temperature

  • 10 to 35 degrees C (50 to 95 degrees F)
Cheetah SPI Host Adapter

Bit Rate

  • SPI Master: 0.1 MHz - 40+ MHz

Target Bus Interface

  • SPI Master

Host Bus Interface

  • USB 2.0
  • Type-B receptacle

Target Bus Cable

  • 10-pin ribbon cable
  • 1.27mm (0.05") pitch
  • 25.4 mm (1") length

Target Bus Connector

  • Type: 2x5 IDC female, 2.54 mm (0.10") pitch
  • Pinout
    • Power Pins: GND (Pins 2,10), NC/+5V (Pins 4,6)
    • SPI Pins: SS2 (Pin1), SS3 (Pin 3), MISO (Pin 5), SCLK (Pin 7) MOSI (Pin 8), SS1 (Pin 9)

DC Characteristics

  • Target Power: +5V, 25 mA max
  • I2C/SPI/MDIO Signal: 3.3V, 10mA

Operating Temperature

  • 10 to 35 degrees C (50 to 95 degrees F)
Minimum Hardware Requirements
  • Intel or AMD processor operating at 2 GHz or faster
  • 1 GB physical RAM (32-bit) or 2 GB RAM (64-bit)
  • 2 GB or more available hard disk space
  • Full-speed USB port
  • VGA capable of 1024-x768 or higher screen resolution
  • Internet access is helpful
Required Software (Windows & Linux)
PC Requirements & Supported Operating Systems
  • Windows: 7, 8, 8.1, 10
  • Linux: Red Hat, SuSE, Ubuntu, Fedora
  • Mac OS X: 10.7 - 10.14
Dimensions and Weight
  • (W x D x L) 55.6 x 22.2 x 89 mm (2.19"x0.87"x3.5")
  • 64 g (0.14 lbs)
Quality
  • CE
  • RoHS
  • One Year Warranty
  • Manufacturing
    • ISO 9001
    • ISO 13485
    • AS9100C
    • ITAR

Related Products